According to EAT’s CEO, Jozefina Lichtenegger, ‘In the fully-balanced input stage, we fitted a Lundahl step up transformer with an amorphous core, type LL9206. I don’t know of anything better.’ The unit’s gain is 50db, plus the voltage gain of the step- up transformer. E-Glo’s amplifier section uses split, fully passive equalisation, without any equalisation in negative feedback loop, which can harm the sound. At this level of performance, only the best components will suffice. The choice of output capacitor is the highly-praised Mundorf 3.3uF. All other capacitors are Obbligato or WIMA. Mundorf Connectors with Teflon insulation have been chosen for their unparalleled integrity.
To ensure the utmost flexibility, to ensure perfect matching to a wide range of cartridges, the E-Glo provides capacitance loading for moving-magnet types in six user-switchable steps from 47pf to 900pF. ‘The loading resistance for moving-coil cartridges is continuously adjustable,’ says Lichtenegger, ‘as we already have on our Phono Box RS.’ Ensuring quiet operation is the use of an external power supply, connected to the E- Glo via a special 9-pin connector, familiar to hose who recall the legendary Cello Palette preamplifier. Its heart is a custom-made EI transformer with low core saturation (only 0.9T) and it is fabricated from 0.5mm EI metal sheets. The transformer features double shielding between the primary and secondary windings. This avoids the intrusion of RFI, while acting as superior mains filter. Separate power supplies feed the tube phono preamplifier because the best way to shield a mains transformer from electromagnetic radiation of is to distance it from the electronics. Metal shielding alone cannot perform the task as well as a separate power supply. For the rectifying circuitry, EAT fitted special diodes with noise suppressing resistors. Also employed are high-quality electrolytic capacitors, followed by a voltage regulator with capacitor multiplier. The power component is a FET transistor. A feast for the eyes, the handsomely styled E-Glo is housed in a 450x300x160mm chassis, is valves peering through cleverly design heat sinks that recall the two sppols of a reel-to-reel tape deck. Across the front section are rows of switches for instant access to all settings – no need to ‘get inside’ to set the E-Glo for your cartridge of choice. E.A.T.’s E-Glo is a state-of-the-art phono stage able to extract the ultimate performance from any cartridge it asked to accommodate.